Product 
  • G.A

  • PBT PET

  • PA

  • PC、ABS、PC/ABS、HIPS

  • PP、PE

  • LSOH

  • ATO MB for PVC

  • ATO MB For Rubber

  • Antibacterial MB

  • FujiChem

Name Grade Command Usage
PP Processing Additive WP-4000 No odor, no precipitation, suitable for PP fifilling, color masterbatch, blowing fifilm, non-woven fabric, hot melting adhesive.
Flake TiO2 CCT-40(F) 40% medium and low concentration, can be used in direct injection for wall switch, shading parts, etc.
Pellet TiO2 CCT-85DB 85%concentration, high-concentrated TiO2 that can be applied in LED shading fifilm.
Pellet High effecient CB MBF-100 50% reduction in dosage than general type
Pellet Special CB MB   GCB-50LS Low odor  
GCB-45 General type, cost-effffective  
Pellet Carbon nanotube NET-10E PE carrier, high dispersion, easy to use.
Pellet Conductive CB CCE-40 Compatibilizer carrier, suitible for all kinds of plastics, better performance if direct adding.
transesterification inhibitor CLE-30CB For PC/PBT/PET/PCT/PETG/PCTG/TPEE and other polyester alloy, inhibiting the increase of melting index.
Pellet MCA CFN-80 80% MCAEthylene copolymer, solve the feeding problem.
Copolymerization Impact modifier   MTG-12B Ethylene copolymer with high GMA content, fifirst choice for super tough polyester and polyester alloy.
MTG-05B Ethylene-acrylate-GMA copolymer. Recommend dosage: 1%.
Copolymerization compatilizer ETB-16 Ethylene-acrylate copolymer. Recommend dosage: 3-5%(
Silicone Processing additive ULS-60E Processing additive with high content of silicone, high dispersion and easy to use.
MLS-08M For PC/PBT/PA, improve the surface quality, easy to demould, reduce the molding cycle. Recommend dosage: 0.5-3.0%.
MLS-0803E High molecular weight,uesed in cable and wire.Improve the speed of pulling wire and the surface quality. Recommend dosage: 0.5-3.0%
General Additive
Type Name Grade Command Usage
Brominated flame retardant masterbatch DBDPE Masterbatch FE-03(L2) 90% Concentration, special carrier and dispersing agent/11 replace powder (self-certifification)
BEO Compound Masterbatch CFM-13/GW High flfluidity/economic type, PBT/GF/MB=55/30/15
CFM-23/C Good heat resistance/economic type, PBT/GF/MB=55/30/15
BPS Compound Masterbatch MFM-51B Good heat resistance. PBT/GF/MB=55/30/15
BT-93W Masterbatch CFB-93T 85% Concentration, good heat resistancehigh weather resistance, non-pollution and impact modify type.
Halogen Free Hypophosphite Compound masterbatch CFP-80B High effiffifficent compound halogen free masterbatch. PBT/GF/ MB=50/30/20.
ATO Masterbatch ATO Masterbatch FA-03(F) 90% Concentration, special carrier and dispersing agent/11 replace powder (self-certifification)
NFA-80B 80% Concentration, PBT carrier.
CFA-55B(F) Economic compound masterbatch90% concentrationreduce costsmaintain performance
Sodium antimonate Masterbatch FNA-80 80% Concentration, PET carrier and dispersant, maintaining performance.
Functional Masterbatch Hyper dispersant MLH-10B High glass fifiberhigh fifilling hyper dispersant for polyester. Recommand dosage: 1-2%.
yellowing resistant antioxidant MAO-1012B Adding during injectiong, maintaining the best performance. With exclusive lubricant.Recommand dosage: 4%.
Pellet Laser Marking Additive LA-W02B White to black injection molded parts. It can be added to the modifified plastics during injection moulding with the addition of 4%.
LA-B02W Black to white injection molded parts.It can be added to the modifified plastics during injection moulding with the addition of 4%.
Functional Masterbatch for PBT PET
Type Name Grade Recommend Usage
Br FR MB   DBDPE Masterbatch   FE-05(L2)   90% Concentration, special carrier and dispersing agent/1:1 replace powder(self-certifification)  
Compound Masterbatch   CFM-10AL2   V-0, high flfluidity, PA66/GF/MB=50/30/20  
BPS Compound Masterbatch MFM-51A   Standard type, for high temperature PA. PA/GF/MB=45/30/25  
MFM-23867   Economical type, for PA66. PA/GF/MB=45/30/25  
ATO MB   ATO MB CFA-05A(F)   90% Concentration, special carrier for PA and dispersing agent(Montan Wax)  
NFA-80A   80% Concentration, special carrier for PA and dispersing agent(Montan Wax)
Halogen free FR MB   MCA MB MFN-40A   40%MCA, Compound carrier.High flfluidity, suitible for direct injection.  
Hypophosphite MB NFP-75A   75% Concentration, PA6 carrier, special dispersant, easy to process  
Hypophosphite Compound MB NFP-75M   High effiffifficent compound halogen free masterbatch. PA66/GF/MB=55/25/20
Functional MB   Hyper dispesant MLH-10A66   Hyper dispesant for PA66 with high content of GF and fifilling. Recommand dosage:1-2%.  
MLH-18A6   Hyper dispesant for PA6 with high content of GF and fifilling. Recommand dosage:1-2%.
High temperature yellowing resistant antioxidant MAO-9812A   Adding during injectiong, maintaining the best performance. With exclusive lubricant.Recommand dosage: 4%.
Functional Masterbatch for PA
Type   Name   Grade   Recommend Usage  
Br FR MB   BT-93W MB   CFB-93T   85% Concentration, good heat resistance, high weather resistance, non-pollution and impact modify type.  
TBBPA MB   CFB-40H   90% concentration, high flfluidity, heat-resistant, impact modifified(For ABS)  
TBBPA Compound MB   CFM-40   ABS(V-0) General type ABS:MB=77:23(For ABS)  
245 Compound MB   CFM-245   PC/ABS(V-0), General type ABS:MB=75:25  
ATO   ATO MB   CFA-90S(F)   90% Concentration, special carrier and dispersing agent/1:1 replace powder (self-certifification)  
Br+ATO   DBDPE/ATO Compound MB   CFM-10PS   High heat resistance HIPS:MB=76:24  
Halogen Free   Phosphate ester MB   BDP-45C   High concentration of BDP MB,PC carrier,PC:ABS:MB=58:12:30 (Direct injection)  
HFFR shading MB   NFT-30C   PC carrier, shading, GWFI >850℃ . PC/MB=95:5(Direct injection)  
Functional MB   High molecular weight silicone MB   ZLS-30C   PC Carrier, improve surface quality, easy to demould, reduce the molding cycle.  
Flow additive   MLH-10C   Hyper dispesant for PC with high content of GF and fifilling. Recommand dosage:1-2%.  
AS carrier CB MB   MBC-30S   Black MB for highlight. Recommand dosage: 1-2%.  
Antibacterial MB   BZA-10220   It is widely used in ABS fifire-retardant toilet ring, toilet cover and household appliances, and is not easy to discolor.  
BMA-50220   Ag+, It is widely used in ABS fifire-retardant toilet ring, toilet cover and household appliances.  
Antifouling MB   CB-50 PP/AB/PE   Household appliances, daily necessities, easy to clean
Functional Masterbatch for PC、ABS、PC/ABS、HIPS
Type   Name   Grade   Recommend Usage
Br FR MB   DBDPE MB   FE-03(L2)   90% Concentration, special carrier and dispersing agent/1:1 replace powder (self-certifification)
Br FR MB   DBDPE ATO MB   CFM-10P/C   V-0, High flfluidity/Economic type, 25phr, need to add the talc or GF( 20-30phr)
NFM-10PL2   V-0, PP carrier. High flfluidity, low additive amount and high modulus, 25%talc and glass fifiber are needed(20-30%)
BT-93W Compound MB   CFM-93   High heat resistancehigh weather resistancesuitable for the processing temperature over 300 ℃
BDDP MB   CFM-08P45   V-2, no black point, no precipitation, no color change.
LOW halogen   Br-N MB   NFP-45P   V-2, general type. dosage in HOMO-PP: 4-6phr; dosage in Co-PP: 9-18phr.
Halogen free   Intumescent flflame retardant   NFP-75P   V-0, PN halogen free intumescent flflame retardant. PP/MB=75/25(Direct injection)
APP MB   NFP-65P 65% Concentration, PP carrier.
Functional MB   Pellet Conductive MB   NCE-30P Nearly zero surface resistance, suitable for injection moulding mixed with PP resin.
Pellet Mg Whisker   NMG-60P PP(POE) Carrier to Improve the Modulus of Filled PP
Antibacterial MB   BZP-10220 It is widely used in ABS fifire-retardant toilet ring, toilet cover and household appliances, and is not easy to discolor.
BMP-50220 Ag+, It is widely used in ABS fifire-retardant toilet ring, toilet cover and household appliances.
Antifouling MB   CB-50 PP/AB/PE Household appliances, daily necessities, easy to clean
Functional Masterbatch for PP、PE
Type   Name   Grade   Recommend Usage  
Br+ATO   DBDPE ATO MB   NFM-10SG   85% compound concentration, special surface treatment powder, improve linear speed and product surface quality, excellent water resistance.  
Functional MB   MAH-g-LLDPE   WEK-302   Improve the compatibility of resin and fifiller. dosage: 3-15%  
High molecular weight silicone processing additive   MLS-0803E   Improve the speed of pulling wire and the surface quality. dosage:0.5%-3.0%.
Functional masterbatch for LSOH
Type Name Grade   Recommend Usage 
ATO ATO MB NFA-80V   PVC carrier, provide the difffferent standard (1.0-2.0mm) and concentration masterbatch. 
CFA-92V   92% the highest concentration, EVA carrier, special dispersant, micro powder is provided.
ATO masterbatch for PVC
ATO MB For Rubber
Type Name Grade Recommend Usage
ATO ATO MB RFA-90 EPDM carrier
Ceramic Pellet Ceramic powder NAL-50 Improve Surface Hardness and Friction resistance of Products
Antibacterial Masterbatch
Name Carrier Type Usage Application Recommend  
BME-10215 PE Silver-zinc composite 2% PE 1.Extrusion 2.Widely used in cutting boards and home appliances
BME-10220 PE Silver-zinc composite 1.5% PE 1.Injection molding 2.Widely used in cutting boards and home appliances
BMP-10220 PP Silver-zinc composite 1.5%-2% PP 1.Particularly suitable for highly transparent products 2. 可表示 Ag+
BMA-10220 ABS Silver-zinc composite 2.5%-3.5% ABS 1.Particularly suitable for highly transparent products 2. 可表示 Ag+
BZP-10220 PP Zinc 1.5%-2% PP 1.Widely used in V-0/V-2 flflame retardant toilet rings,toilet cover and home appliances 2.Long-term discoloration
BZA-10220 ABS Zinc 2.5%-3.5% ABS 1.Widely used in V-0/V-2 flflame retardant toilet rings,toilet cover and home appliances 2.Long-term discoloration
BMP-50220 PP Silver-zinc composite 1.5%-2% PP 1.Widely used in V-0/V-2 flflame retardant toilet rings,toilet cover and home appliances 2.Long-term discoloration、可表示 Ag+
BMA-50220 ABS Silver-zinc composite 2.5%-3.5% ABS 1.Widely used in V-0/V-2 flflame retardant toilet rings,toilet cover and home appliances 2.Long-term discoloration、可表示 Ag+
Antibacterial agents FujiChem BacteKiller PP-20-102VT
PP-20-502FA
ABS-20-102VT
ABS-20-502FA